• Engine tuning

    Performance silicone hose

    • 3 layers lightweight and flexible hose
    • High quality standards
    • Straight hose available from 6 to 80 mm diameter
    • Sold by meter
    • 45°, 90° and 135° elbows available in 100 x 100, 127 x 127 and 150 x 150 mm
    • Straight reducers availble in 127 mm
    • Colour: Blue, black
    • Other lenghts available on demand
    • Ref. 861...
    http://cdn.red-spec.com/wp-content/uploads/performance_-silicone_hose.jpg
  • Engine tuning

    Oil catch tanks

    • Square bulk head mount oil catch tank
    • Must have for race cars / track cars and turbo applications
    • Inlet ports: 9/16" UNF
    • Manufactured in Europe
    • Size: 180 mm x 105 mm x 65 mm
    • Available in 1 or 2 liters capacity
    • Ref. 8TOCT001P (1 litre) / 8TOCT002P (2 litres)
    http://cdn.red-spec.com/wp-content/uploads/oil_catch_tanks.jpg
  • Engine tuning

    Dry sump oil tanks

    • Inlet / outlet ports: DASH 12
    • Available in 7, 9 and 10 liters capacity
    • Screw cap: 40 mm
    • Breather: 10 mm
    • Size: ø190 mm x (H)270 mm (7 liters)
    • Size: ø190 mm x (H)356 mm (9 liters)
    • Size: ø190 mm x (H)410 mm (10 liters)
    • Ref. 8TODS02 / 8TODS03 / 8TODS04
    http://cdn.red-spec.com/wp-content/uploads/dry_sump_oil_tanks.jpg
  • Engine tuning

    Header tank

    • Vertical round header tank
    • Made out of 2mm alloy
    • 10 mm over flow pipe
    • Standard Radiator Cap Top (sold separatly)
    • Designed to fit to a bulk head or some flat surface
    • Ref. 726002
    http://cdn.red-spec.com/wp-content/uploads/header_tank.jpg
  • Engine tuning

    Fuel swirl pot

    • Reduces risk of fuel pump or engine failure
    • Provides a constant supply of fuel under hard cornering or braking forces
    • Base mount, 100 mm diameter
    • Capacity: 1 litre
    • Thread: 4 x DASH 6
    • Ref. 400010
    http://cdn.red-spec.com/wp-content/uploads/4000101.jpg
  • Engine tuning

    Fuel tank baffle foam

    • Designed to help prevent fuel surge.
    • Facilitates accessory installation within the tank: Fuel pump, catch tank etc.
    • For fuel only.
    • Supplied in 10 liters pre-cut blocks.
    • Size: 22 x 22 x 21 cm.
    • Ref. 6REMOU00_10L
    http://cdn.red-spec.com/wp-content/uploads/mousse-reservoir-420x420.png
  • Engine tuning

    Sandwich plate - Universal

    • Designed in billet aluminium
    • Light and reliable
    • 2 x M14x150 threads
    • M18x150 female circuit threads
    • Delivered with : M20x150 and 3/4 UNF screws to fit any engine and sender adaptators
    • Ref. 8rs1015S
    http://cdn.red-spec.com/wp-content/uploads/8RS1015S_2_420X420.png
  • Engine tuning

    Quick disconnect coupling

    • Top technology brought to you at the best prices !
    • Allow fast connecting / disconnecting of any hydraulic circuit types without any air inclusion or leakage.
    • Easy to disconect, bayonet-type locking system.
    • Designed for maximum reliability and performance under race conditions.
    • Light and compact.
    • Available in high quality aluminim or titanium versions.
    • Two types of high quality seals available:
      • 1. EPDM: For brake fluid - from DASH 3 to DASH 4
      • 2. FPM: For fuel, oil, cooling and power steering circuit - from DASH 4 to DASH 12.
    • Sold by unit, including male and female components.
    • Ref. 8RSDH...
    TUV/GS
    http://cdn.red-spec.com/wp-content/uploads/8RSDH-420x420.png
  • Engine tuning

    Competition exhaust systems

    • Group A and N exhaust
    • Perfect choice for competition
    • Available in steel or stainless steel
    • Give the best gas flow, reduce back pressure and increase torque and engine performance
    • Wide range available, for almost any vehicle
    • Ref. 661...
    http://cdn.red-spec.com/wp-content/uploads/competition_exhaust_systems.jpg
  • Engine tuning

    Decatalyst tubes

    • Replaces the catalyst silencer to increase power through improved gas evacuatio
    • Perfect choice for competition
    • Available in steel or stainless steel
    • Made in Italy
    • Wide range available, for almost any vehicle
    • Ref. 660KTS... / 664...
    http://cdn.red-spec.com/wp-content/uploads/Decatalyst.png
  • Transmission

    Reinforced performance clutches

    • Developped and tested with success on Group N rallies
    • Can be fitted as a direct replacement for the standard unit
    • No flywheel modification needed on most applications
    • Reinforced clutch cover, clutch disc and release bearing available
    • Ref. 152...
    http://cdn.red-spec.com/wp-content/uploads/reinforced_performance_clutches.jpg
  • Transmission

    Release bearing

    • Aluminium body and stainless steel central guide
    • Fixation and size same as CP3959
    • Aluminium body and piston
    • Surface: 920 mm2
    • Max stroke: 18 mm
    • Fittings: M12 x 100
    • Liquid: AP RACING 550 / AP RACING 600 / FERODO
    • Ref. HPL1001 (Bearing) / HPL1003 (Repair Kit)
    http://cdn.red-spec.com/wp-content/uploads/butee.jpg
  • Transmission

    Wheel spacers

    • Made of high quality aluminium
    • Increases lateral stability and improves road handling
    • TÜV Approved
    • Sold by pair
    • Longer studs or bolts may be needed in order to use these wheel spacers
    • Numerous models available:
    1. Wheel spacers without bolts: 16 or 20 mm wide spacers. Your wheel bolts (sold separately) must be longer than the original bolts and the thickness of the spacer
    2. With simple bolts: 16 or 20 mm wide spacers, with conical bolts. Supplied with all necessary studs and bolts for installation
    3. With double bolts: 30, 35, 40 or 50 mm wide spacers. Supplied with stud bolts and steel inserts. Compatible with the original studs of your car: the stud bolts attach the spacers to the hub and the wheel attaches to the chock with the original studs
    • Ref. 830...
    TUV/GS
    http://cdn.red-spec.com/wp-content/uploads/spacers1.jpg
  • Transmission

    Quick shift

    • These Quick Shifts are a combination of top quality, precision manufacture, strong, durable, light weight that will give a responsive and fast gear change
    • Our Competition-Pro Quick Shifts will deliver in all areas that is required in Rally, Track, Drifting or any Motorsports environment
    • Fully adjustable, can be adjusted upto 60% in gear shift reduction
    • Made in England
    • Available for Citroën Saxo / Citroën AX / Peugeot 106 and for Peugeot 206 / Peugeot 306 / Citroën Xsara
    • Ref. 8OBPQS
    http://cdn.red-spec.com/wp-content/uploads/8OBPQS001_8OBPQS002.jpg